GTI NB-IoT Module Test Specification

2018-02-22 17:59:52 | Source:

Table of Contents


1 Scope


2 References


3 Definitions, symbols and abbreviations


4 Test Environment

4.1 Default Test Environment
4.1.1 Test Frequencies
4.1.2 USIM Parameters
4.2 Test System Architecture
4.2.1 Common Test System Architecture
4.3 UE Configuration


5 Connectivity
5.1 Basic Communication Procedure
5.1.1 Test Purpose
5.1.2 Reference Specification
5.1.3 Test Applicability;
5.1.4 Test Conditions
5.1.5 Test Procedure
5.1.6 Expected Result


6 Throughput and RF performance
6.1 UL Service in Enhanced Coverage/Throughput/TX RF performance
6.1.1 Test Purpose
6.1.2 Reference Specification
6.1.3 Test Applicability;
6.1.4 Test Conditions
6.1.5 Test Procedure
6.1.6 Expected Result
6.2 DLService in Enhanced Coverage/Throughput/RX RF performance
6.2.1 Test Purpose
6.2.2 Reference Specification
6.2.3 Test Applicability
6.2.4 Test Conditions
6.2.5 Test Procedure 
6.2.6 Expected Result
6.3 NRSRP/NRSRQ/SINR measurement under no interference environment
6.3.1 Test Purpose
6.3.2 Reference Specification
6.3.3 Test Applicability
6.3.4 Test Conditions
6.3.5 Test Procedure
6.3.6 Expected Result
6.4 NRSRP/NRSRQ/SINR measurement under AWGN environment
6.4.1 Test Purpose
6.4.2 Reference Specification
6.4.3 Test Applicability
6.4.4 Test Conditions
6.4.5 Test Procedure
6.4.6 Expected Result
6.5 NRSRP/NRSRQ/SINR measurement under neighbor cell interference environment.
6.5.1 Test Purpose
6.5.2 Reference Specification
6.5.3 Test Applicability
6.5.4 Test Conditions
6.5.5 Test Procedure
6.5.6 Expected Result


7 Power Consumption
7.1 Power Consumption in Idle State/PSM
7.1.1 Test Purpose
7.1.2 Reference Specification
7.1.3 Test Applicability;
7.1.4 Test Conditions
7.1.5 Test Procedure
7.1.6 Expected Result
7.2 Power Consumption in Idle State with eDRX
7.2.1 Test Purpose
7.2.2 Reference Specification
7.2.3 Test Applicability;
7.2.4 Test Conditions
7.2.5 Test Procedure
7.2.6 Expected Result
7.3 UL Aperiodic Service with PSM / Power Consumption
7.3.1 UL Aperiodic Service with PSM / Power Consumption/15K ST
7.3.2 UL Aperiodic Service with PSM / Power Consumption/15K MT
7.3.3 UL Aperiodic Service with PSM / Power Consumption/3.75K
7.4 DL Periodic Service with eDRX / Power Consumption
7.4.1 Test Purpose
7.4.2 Reference Specification
7.4.3 Test Applicability;
7.4.4 Test Conditions
7.4.5 Test Procedure
7.4.6 Expected Result
7.5 Bidirectional Service with eDRX / Power Consumption
7.5.1 Test Purpose
7.5.2 Reference Specification
7.5.3 Test Applicability;
7.5.4 Test Conditions
7.5.5 Test Procedure
7.5.6 Expected Result
7.6 Uplink Data Transmission in MAC Layer / Power Consumption
7.6.1 Uplink Data Transmission in MAC Layer/ Power Consumption/15K ST
7.6.2 Uplink Data Transmission in MAC Layer/ Power Consumption/15K MT
7.6.3 Uplink Data Transmission in MAC Layer/ Power Consumption/3.75K
7.7 Downlink Data Transmission in MAC Layer / Power Consumption
7.7.1 Test Purpose
7.7.2 Reference Specification
7.7.3 Test Applicability;
7.7.4 Test Conditions
7.7.5 Test Procedure
7.7.6 Expected Result
7.8 Power Consumption of Registration
7.8.1 Test Purpose
7.8.2 Reference Specification
7.8.3 Test Applicability;
7.8.4 Test Conditions
7.8.5 Test Procedure
7.8.6 Expected Result


8 Positioning
8.1 Positioning Service/GPS
8.1.1 Test Purpose
8.1.2 Reference Specification
8.1.3 Test Applicability;
8.1.4 Test Conditions
8.1.5 Test Procedure
8.1.6 Expected Result
8.2 Positioning Service/BDS
8.2.1 Test Purpose
8.2.2 Reference Specification
8.2.3 Test Applicability;
8.2.4 Test Conditions
8.2.5 Test Procedure
8.2.6 Expected Result
8.3 Positioning Service / GPS / Power Consumption
8.3.1 Test Purpose
8.3.2 Reference Specification
8.3.3 Test Applicability;
8.3.4 Test Conditions
8.3.5 Test Procedure
8.3.6 Expected Result
8.4 Positioning Service / BDS / Power Consumption
8.4.1 Test Purpose
8.4.2 Reference Specification
8.4.3 Test Applicability;
8.4.4 Test Conditions
8.4.5 Test Procedure
8.4.6 Expected Result


Annex A Communication Suite
A.1 Test Architecture for Communication Suite
A.2 Communication Suite
A.2.1 Test Purpose
A.2.2 Reference Specification
A.2.3 Test Applicability
A.2.4 Test Conditions
A.2.5 Test Procedure
A.2.6 Expected Result


Annex B Propagation Conditions

GTI NB-IoT Module Test Specification dl.jpg


 

    Related Stories

    No relevant information
Back top

Please enter the keywords

ok