1 Scope

2 Definitions, Symbols and Abbreviations

3 Reference

4 Test Environment

4.1 Default Test Environment
4.1.1 Special Test Environment
4.1.2 Cell Configuration
4.1.3 USIM Parameters
4.1.4 Common Procedures
4.2 Applicability for the UE Configuration

5 Basic Function

5.1 PLMN Selection
5.1.1 PLMN Selection, Multi-RAT Background, the highest priority HPLMN, Automatic Mode
5.2 Cell Selection
5.2.1 Multi-mode Environment Cell Selection, NR Cell Available   
5.2.2 Multi-mode Environment Cell Selection, E-UTRAN Available
5.2.3. Multi-mode Environment Cell Selection, NR Cell Available
5.2.4. Multi-mode Environment Cell Selection, NSA Cell Available
5.2.5 Initial Cell Selection from Power-Up
5.3 RRC connection/connection reconfiguration
5.3.1 RRC connection re-establishment, radio link failure, re-establish to a Prepared Inter-Freq cell
5.3.2 BWP configuration, downlink and uplink BWP addition /release
5.4 Registration/De-registration
5.4.1 Initial Registration, SA
5.5 NSA
5.5.1 Multi-mode Environment Cell selection for NSA
5.5.2 Initial Registration, NSA
5.5.3 Bandwidth Part Configuration, SCG, EN-DC
5.5.4 NSA-RLF
5.6 CSI-RS Measurement
5.6.1 CSI Reporting Periodic in PUSCH
5.6.2 CSI Reporting Aperiodic in PUSCH
5.6.3 CSI Reporting Aperiodic in PUSCH
5.6.4 CSI-RS Based Intra Frequency Measurements on Neighbour Cell Beams
5.6.5 CSI-RS Based Inter Frequency Measurements on Neighbour Cell Beams
5.7 RRC Inactive mode cases in SA
5.7.1 RRC Connected Mode to RRC Inactive Mode and RRC Resume Procedure
5.7.2 Periodic RNA Procedure in RRC Inactive Mode
5.7.3 RNA in RRC Inactive Mode for Cell Reselection to new RNA cell
5.8 Access Barring, Access Class   
5.8.1 Cell Barred while in RRC IDLE State
5.8.2 Access Categories for Different Services
5.8.3 Access Barring Check in RRC

6 Mobility   

6.1 Intra-system (NR) Mobility
6.1.1 Intra-system cell reselection
6.1.2 Intra-system handover
6.2 Inter-RAT Mobility
6.2.1 Inter-RAT cell reselection
6.2.2 Inter-RAT Handover
6.2.3 Inter-RAT Redirection Service
6.3 NSA
6.3.1 Cell Reselection, from NSA P-Cell to E-UTRAN cell
6.3.2 Cell Reselection, from E-UTRAN cell to NSA P-Cell
6.3.3 P-Cell Handover with SCG change, Data continuity
6.3.4 P-Cell Handover with SCG unchange, Data continuity
6.3.5 Data Session continuity, from NSA cell to E-UTRAN cell
6.3.6 Data Session continuity, from E-UTRAN cell to NSA cell
6.3.7 SCG change with P-Cell remain the same, Data continuity

7 Service

7.1 Voice
7.1.1 Redirection from NR to E-UTRAN，MO call，SA mode
7.1.2 Redirection from NR to E-UTRAN，MT call，SA mode
7.1.3 VoLTE MO Call with E-UTRAN Cell, UE works in NSA mode
7.1.4 VoLTE MT Call with E-UTRAN Cell, UE works in NSA mode
7.2 Date Transmission

8 Roaming

9 Power Consumption

9.1 Idle Mode
9.1.1 Idle Mode, Power Consumption, Cell Centre, SA
9.1.2 Idle Mode, Power Consumption, Cell Edge, SA
9.1.3 Idle Mode, Power Consumption, Cell Centre, NSA
9.1.4 Idle Mode, Power Consumption, Cell Edge, NSA
9.1.5 Idle mode with intra Frequency Measurement, Power Consumption
9.1.6 Idle mode with inter Frequency Measurement, Power Consumption
9.2 RRC Connection mode
9.2.1 Connected Mode, Power Consumption
9.2.2 Inter Frequency Handover, Power Consumption, LTE to LTE
9.2.3 Inter Frequency Handover, Power Consumption, NR Cell
9.3 Voice (VoLTE/VoNR)
9.3.1 VoLTE MO Call with E-UTRAN Cell, Power Consumption
9.3.2 VoNR MO call, Power Consumption
9.3.3 VoLTE MT Call with E-UTRAN Cell, Power Consumption
9.4 Data Transmission, Power Consumption
9.4.1 UL Data Transmission, Power Consumption，SA
9.4.2 DL Data Transmission, Power Consumption, SA
9.4.3 Bi-direction Data Transmission, Power Consumption, SA
9.4.4 UL Data Transmission, Power Consumption，NSA
9.4.5 DL Data Transmission, Power Consumption, NSA
9.4.6 Bi-direction Data Transmission, Power Consumption, NSA   
9.5 Power Consumption - Inactive Mode
9.5.1 RRC Inactive Mode, Power Consumption, SA
9.5.2 RRC Inactive Mode – RNA Timer Expiry, Power Consumption
9.6 BWP, Power Consumption
9.6.1 Downlink Data Transmission with different BWP, Power Consumption, SA
9.6.2 Uplink Data Transmission with different BWP, Power Consumption, SA
9.6.3 Downlink Data Transmission with different BWP, Power Consumption, NSA
9.6.4 Uplink Data Transmission with different BWP, Power Consumption, NSA

10 Data Throughput

10.1 Downlink TCP Throughput
10.1.1 DL Throughput under static channel, DL 256QAM, DL4*4 MIMO
10.1.2 DL Throughput under fading channel, DL 256QAM, DL4*4 MIMO
10.2 Uplink TCP Throughput
10.2.1 UL Throughput under static channel, UL 64QAM, DL2*2 MIMO
10.2.2 UL Throughput under static channel, UL 256QAM, Single TX, HPUE   
10.2.3 UL Throughput under static channel, UL 256QAM, UL2*2 MIMO
10.3 Bidirectional UDP Throughput
10.3.1 Bidirectional Throughput under static channel,256QAM, DL 4*4 and UL 2*2 MIMO
10.3.2 Bidirectional Throughput under fading channel,256QAM, DL 4*4 and UL 2*2 MIMO
10.4 Downlink TCP Throughput, NSA
10.4.1 DL Throughput under static channel, NSA
10.4.2 DL Throughput under fading channel, NSA
10.4.3 DL Throughput under static channel on SCG, DL 256QAM, NSA
10.4.4 DL Throughput under fading channel on SCG, NSA
10.5 Uplink TCP Throughput, NSA
10.5.1 UL Throughput under static channel, UL 64QAM, NSA
10.5.2 UL Throughput under static channel, UL 256QAM, NSA
10.5.3 UL Throughput under static channel on SCG, UL 64QAM, NSA
10.5.4 UL Throughput under static channel on SCG, UL 256QAM, NSA
10.6 Bidirectional UDP Throughput, NSA
10.6.1 Bidirectional Throughput under static channel, 256QAM, NSA
10.6.2 Bidirectional Throughput under fading channel, NSA
10.6.3 Bidirectional Throughput under static channel on SCG, UL 64QAM, NSA
10.6.4 Bidirectional Throughput under static channel on SCG, UL 256QAM, NSA
10.6.5 Bidirectional Throughput under fading channel on SCG, NSA

11 Latency

11.1 Latency Basic Tests
11.1.1 Control Plane Latency – Basic Test
11.1.2 User Plane Latency – Basic Test

12 High Speed Train

13 Beam Management

Appendix A Test Channel Parameters
Appendix B Document Change Record

GTI 5G Device Function and Performance Test Specification-v2.0