1 Scope

2 Normative references   

3 Abbreviations   

4 Basic requirements for the test environment  

 
4.1 Network architecture and scale   
4.2 Test area and route   
4.3 Test network basic configuration   
4.4 Assistance test equipment   
4.5 Interference adding method   
4.6 Test result format   
4.7 Point selection principle   

5 Terminal data service performance test   

5.1 Single-user peak throughput - outdoor DL data - fixed point   
5.2 Single-user peak throughput - outdoor UL data - fixed point - UL 64QAM   
5.3 Single-user peak throughput - outdoor UL data - fixed point - UL 256QAM   
5.4 Single-user peak throughput - outdoor concurrent UL/DL data UL 64QAM   
5.5 Single-user peak throughput - outdoor concurrent UL/DL data UL 256QAM   
5.6 Single-user multi-point throughput - outdoor DL data   
5.7 Single-user multi-point throughput - outdoor UL data   
5.8 Single-user multi-point throughput - outdoor UL/DL data  

 
6 Delay test   

6.1 Control-plane delay test in idle state   
6.2 User-plane delay test  

 
7 BWP configuration test  

 
7.1 Full-bandwidth BWP configuration test   
7.2 Configuration of four BWPs: single-UE multiple-point outdoor test   
7.3 Mobility test with different BWP configurations  

 
8 Architecture for SCG splitless bearer in Option 3x   

8.1 Outdoor DL data test at fixed points   
8.2 Outdoor UL data test at fixed points   
8.3 Outdoor DL&UL concurrent data test at fixed points   

GTI 5G Sub-6GHz Device Field Test Specification_NSA mode_v1.0