GTI 5G Sub-6GHz Device Field Test Specification_SA mode_v1.0
1 Scope
2 Normative references
3 Abbreviations
4 Basic requirements for the test environment
4.1 Network architecture and scale
4.2 Test area and route
4.3 Test network basic configuration
4.4 Assistance test equipment
4.5 Interference adding method
4.6 Test result format
4.7 Point selection principle
5 UE searching network upon boot-up
5.1 Cell selection and registration upon UE boot-up
5.2 Cell search after returning to the coverage area
5.3 Normal REGISTRATION
5.4 Periodic REGISTRATION
5.5 RAN-based notification area update
6 Terminal data service performance test
6.1 Single-user peak throughput - outdoor DL data - fixed point
6.2 Single-user peak throughput - outdoor UL data - fixed point - UL 64QAM
6.3 Single-user peak throughput - outdoor UL data - fixed point - UL 256QAM
6.4 Single-user peak throughput - outdoor concurrent UL/DL data - fixed point - UL 64QAM
6.5 Single-user peak throughput - outdoor concurrent UL/DL data - fixed point - UL 256QAM
6.6 Single-user multi-point throughput - outdoor DL data
6.7 Single-user multi-point throughput - outdoor UL data
6.8 Single-user multi-point throughput - outdoor UL/DL data
7 Delay and paging tests
7.1 Control-plane delay test in idle state
7.2 Control-plane delay test in inactive state
7.3 User-plane delay test
7.4 Fixed-point paging test
7.5 Paging test during mobility
8 UL high power test
8.1 Test on data services of UEs with the power of 26 dBm
8.2 Test on data services of UEs with the power of 23 dBm
9 BWP configuration test
9.1 Full-bandwidth BWP configuration test
9.2 Configuration of four BWPs: single-UE multiple-point outdoor test
9.3 Mobility test with different BWP configurations
10 Handover tests in SA NR system
10.1 Outdoor DL data – handover
10.2 Outdoor UL data - handover
10.3 Outdoor DL&UL concurrent data - handover
11 SUL/CA comparison test
11.1 SUL
11.2 CA
GTI 5G Sub-6GHz Device Field Test Specification_SA mode_v1.0
